Technical Data
HOSAND® Transmitter
The transmitter, attached to a standard cardio chest strap, is powered by a 3V Lithium CR2032 battery. It intercepts the 5kHz radio signal emitted by the chest strap of a standard heart rate monitor (not included) worn by the subject, memorises the data in an internal Flash memory, re-processing them to the sole purpose of improving their transmission, and then transmits them via radio at a frequency of 433.92 MHz.
The lower and upper heart rate alarm limits preset during synchronisation are continuously checked against the current rate; if these limits are exceeded, a warning beep will sound.
The radio module receiving the signal at 5 kHz and the standard module transmitting at 433.92 MHz are integrated by HOSAND Srl with the other electronic components on a printed circuit.
The transmitter can be attached to the cardio chest strap by a Velcro strip or inserted into a special pouch worn round the neck or sewn into a special vest worn by the subject, depending on the type of activity to be monitored. The indicative maximum distance between the strap and the transmitter shall not exceed 30 cm.
Hosand Transmitter Technical data:
• Power supply: one 3V Lithium CR2032 battery
• Battery life: 2 years (at an average use of one hour a day)
• Alarms: programmable
• Switching on: wireless
• Switching off: wireless; switches off automatically after 20 minutes' inactivity.
• Weight: 50 grams
• Casing material: ABS polymer
• Range: up to 200 meters in optimal environmental conditions
• Dual Mode transmission:
• ogni singolo battito cardiaco (beat to beat -massimo un soggetto);
• every single heartbeat (beat to beat – maximum one subject)
• Standard transmission frequency: 433.92 MHz
• Antenna: integrated
• Interference elimination algorhythm: integrated
• Recording mode:
• Directly onto PC via software
• onto the transmitter itself as back-up memory, in 4-second mode and beat to beat
• can be used without the computer as a data recorder, with the heart-rate monitor strap only.
• External surface cleaning: with a damp cloth
HOSAND® receiver with antenna
Receives the signal emitted by the transmitter, transferring it via cable to the Software installed on the PC (or other device). The receiver is connected to the PC via the Synchronization box cable, which also provides the power supply. The radio receiver module is a standard type.
HOSAND® receiver with antenna Technical Data:
• Connection to PC (via synchronisation box): USB port
• Interference elimination algorhythm: integrated
• Potential reach: other receiving antennae can be connected to increase telemetric reach
• Power supply: via USB port
• Casing material: ABS polymer
HOSAND® Synchronisation box
Mounted on the cable connecting the receiver by a 3-pin connector at one end and the PC on the other, via the USB port. Activates the transmitters (to a maximum of 32) and detects the signals arriving from them; data can be downloaded at a later time.
HOSAND® Synchronisation box technical data:
• Use:
• connects the receiving antenna to the PC
• switches on, synchronises and switches off the transmitter
• downloads the data fed by the transmitter
• Power supply: via USB port
• Casing material: ABS polymer
messenger 
Κλήση